3/8” All-Flo Air Diaphragm Pump 9 gpm for Softwash KE038B3 25 PACK ball valve and the depressions

ball valve and the depressions in your hose from careless drivers running over your high pressure hose

A 1" manifold reel such as the 4028-6 would be a better choice if you need to run water through the reel and can't afford to wait on the 'bottleneck affect' of the 1/2" 28" manifold

Do not use Teflon tape because it is much easier to over-tighten the fitting causing a compromise to the integrity of the fitting

Install the regulator using the arrow pointing to the pump >>>>>

The pressure washer should have a plug on the outlet or it is plumbed backwards and you will blow out O-Rings

3/8” All-Flo Air Diaphragm Pump 9 gpm for Softwash KE038B3 25 PACK ball valve and the depressionsPressure Washer Products is proud to offer the All Flo 3 8" Kynar air diaphragm pump assembled in the United States of America for PWP for use specifically with soft wash chemicals. This is a great pump for those who need to pre treat and post treat. This is the only pump on the market that will allow the operator to fully control the flow by using any nozzle size suitable for the job. You can pair this with a little compressor. The fleet washer, soft